View larger

Mini cooper stripes

Reference:

Condition: New product

Mini side stripes stickers suitable for all current models. Very resistant high performance vinyl with UV protection. Everything goes in one piece

Sizes: (Base x height in cms) / Make sure well of the chosen color before confirming the purchase

Total size of each stripe :170x12 cms (has leftovers to cut once you put what you on and be able to adapt it to any model)

This pack includes the two symmetrical stripes on both sides of the car.

Composition

The adhesive consists of 3 parts:

Support paper or silicone paper
Trimmed Vinyl Adhesive
Mask or conveyor

The conveyor is used to apply the adhesive to the desired surface easily.

Final result after assembly.

These adhesives have no background, i.e. once placed the bottom is the surface where we have applied the adhesive. When carefully removing the transfer (3) once placed on the desired surface, only the trimmed adhesive remains.

1-Clean the surface intensively before applying the vinyl

2-Remove the back support paper and apply just sprayed water

3-Place the vinyl carefully

4-Adjust position

5-apply water on top to facilitate the sliding of the scraper

6-Scraper by exerting pressure to make the water come out and eliminate bubbles

7-Let dry for 10 minutes and remove the vinyl by sliding diagonally little by little

8-Make the appropriate cuts carefully and go over with the scraper.

7000 Item Items

(0)

Send to a friend
Send to a friend
Mini cooper stripes
Mini side stripes stickers suitable for all current models. Very resistant high performance vinyl with UV protection. Everything goes in one piece
Sizes: (Base x height in cms) / Make sure well of the chosen color before confirming the purchase
Total size of each stripe :170x12 cms (has leftovers to cut once you put what you on and be able to adapt it to any model)
This pack includes the two symmetrical stripes on both sides of the car.
Composition
The adhesive consists of 3 parts:
Support paper or silicone paper
Trimmed Vinyl Adhesive
Mask or conveyor
The conveyor is used to apply the adhesive to the desired surface easily.
Final result after assembly.
These adhesives have no background, i.e. once placed the bottom is the surface where we have applied the adhesive. When carefully removing the transfer (3) once placed on the desired surface, only the trimmed adhesive remains.
1-Clean the surface intensively before applying the vinyl
2-Remove the back support paper and apply just sprayed water
3-Place the vinyl carefully
4-Adjust position
5-apply water on top to facilitate the sliding of the scraper
6-Scraper by exerting pressure to make the water come out and eliminate bubbles
7-Let dry for 10 minutes and remove the vinyl by sliding diagonally little by little
8-Make the appropriate cuts carefully and go over with the scraper.
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Remove this product from my favorite's list.
Add this product to my list of favorites.